YG3 15.0-15.4 1300 90.5 suitable for semi-finishing of cast iron, nonferrous metal finishing. 
 YG3X 14.6-15.2 1320 92 suitable for high speed finishing of cast iron, nonferrous metals and alloys hardened steel, alloy steel cutting section. K01 YG3X 
 YG6A 14.6-15.0 1370 91.5 suitable for semi-finishing of hard cast iron, nonferrous metals and alloys, also suitable for high-manganese steel, hardened steel, alloy steel semi-finishing and finishing. K05 YG6A 

 YG6 14.5-14.9 1380 89 suitable for finishing with the second half of the medium cutting speed of cast iron, nonferrous metal and alloy non-metallic materials. K20 YG6 
 YG8N 14.5-14.8 2000 90 suitable for high-speed cutting of cast iron, white cast iron, ductile iron and chromium, nickel, stainless steel and other alloy materials. K30 YG8N 
 Of YG8 14.5-14.9 1600 89.5 suitable for the machining of cast iron, nonferrous metals and their alloys, and nonmetallic materials, not flat sections and interrupted cutting of rough turning, rough planing, rough milling, general hole and deep hole drilling, reaming . Of K30 of YG8 
 YT15 11.0-11.7 1150 91 carbon steel and alloy steel processing, roughing, semi-continuous cutting fine cars and fine cars, the small cross section in the interrupted cutting of fine cars, continuous surface of semi-precision milling and finishing. rough expansion of the hole to expand and fine. P10 
 YT14 11.2-12.0 1200 90.0 suitable for the processing of carbon steel, alloy steel, not flat roughing section and continuous cutting and interrupted cutting of semi-fine cars and fine cars, continuous section coarse milling, casting hole expansion drilling and rough expansion. P20 
 YT5 12.5-13.2 1400 89.5 suitable for carbon steel and alloy steel (including steel forgings, stampings and castings epidermis) processing is not flat section and interrupted cutting, roughing, rough planing, semi-fine planing, discontinuous surface rough milling and drilling. P30 
 The YT30 9.3-9.7 1080 92.5 suitable for the finishing of carbon steel and alloy steel, such as the small cross section fine cars, fine boring, fine to expand. 
 YS30 12.45 1800 91.0 is a ultrafine particle alloy, suitable for large pass high efficiency milling all kinds of steel, alloy steel milling. P25 of P30 
 The YS25 12.8-13.2 2000 91.0 adaptation in carbon steel, cast steel, high manganese steel, high strength steel and alloy steel roughing milling and planing. M20, M30P20, P40 
 YS2T 14.4-14.6 2200 91.5 of the alloy of the ultrafine particles, suitable for low speed rough turning, milling, heat-resistant alloys and titanium alloys for cutting knife and tap, saw cutter is a plus. Of K30 M30 is 
 The hardness of ≥ of YS8 (M05) applicable to 92.5S iron base, nickel-base superalloys, high-strength steel finishing chilled cast iron, heat-resistant stainless steel, high manganese steel, hardened steel finishing. 
 YW1 12.6-13.5 1200 91.5 suitable for heat-resistant, high-manganese steel, stainless steel and other difficult to machine steel and ordinary steel and cast iron machining. M10 
 YW2 12.4-13.5 1350 90.5 suitable for heat-resistant steel, high manganese steel, stainless steel and advanced alloy steel, special hard steel processing, finishing, and finishing. The processing of ordinary steel and cast iron. M20 
 YW3 12.7-13.3 1300 92 suitable for alloy steel, high strength steel, low alloy, super-strength steel finishing and semi-finishing. Finishing or in the case of small impact. The M10 the M20 
 The YD201 suitable industry has a sharp blade requirements of the tool should be used in the cutting speed and a larger feed, has good wear resistance and toughness. 
 YC201 applicable to the finishing of carbon steel and alloy steel, such as the small cross section fine cars, fine boring, fine expansion. 
 YM201 in cast iron, non-ferrous metal finishing, semi-finishing, can also be used in manganese steel, hardened steel machining.